2015

Product Description The Fuel Filler Gas Cap is a component of a vehicle's fuel system that seals the opening of the fuel tank to prevent the escape of fuel vapors and the entry of dust, dirt, and other debris. The fuel filler gas cap has...

Product Description The Fuel Filter Housing Assembly is a complete unit that includes the Fuel Filter Housing, the fuel filter element, and all other necessary components for the proper installation and operation of the fuel filter. Daysyore offers a full range of Fuel Filter Housing Assembly products...

Product Description The Fuel Cap Tank Filler Pipe Door Flap Housing is the housing that covers the fuel filler pipe on a vehicle. It is located on the exterior of the vehicle and is typically located on the side or rear of the vehicle....

Product Description The Fuel Rail with Sensors is a component in a fuel-injected engine that distributes pressurized fuel to the fuel injectors. The fuel rail is a metal tube that is mounted to the engine and connects to the fuel injectors via small hoses or...

Product Description The VCM intake motor is a specific type of intake motor that is used in vehicles equipped with General Motors' Variable Cylinder Management (VCM) system. The VCM system is designed to improve fuel efficiency by deactivating some of the engine's cylinders under...

Product Description Daysyore offers the Fuel Pump Suction Control Valve designed to meet or exceed the OEM specifications, and has been tested and validated to ensure optimal performance and reliability.   Specifications OE Number: 1460A037 Weight: 0.183kg Type: Aftermarket Warranty: 12 months Compatibility 2008-2016 Mitsubishi L200 2.5 2006-2019 Mitsubishi Pajero/Shogun...

Product Description A Fuel Pressure Sensor is a component in a vehicle's fuel system that measures the pressure of fuel inside the fuel rail or fuel line. The sensor is typically located in the engine compartment, near the fuel injectors, and is connected to...

Product Description The Air Intake Manifold is a component in the engine system that is responsible for distributing air to the engine cylinders. It is typically located between the throttle body and the engine cylinder head.The Air Intake Manifold is designed to deliver the...

Product Description The Air Intake Manifold is a component in the engine system that is responsible for distributing air to the engine cylinders. It is typically located between the throttle body and the engine cylinder head.The Air Intake Manifold is designed to deliver the...

Product Description The Air Intake Manifold is a component in the engine system that is responsible for distributing air to the engine cylinders. It is typically located between the throttle body and the engine cylinder head.The Air Intake Manifold is designed to deliver the...

Product Description The Intake Manifold Swirl Flap Rod Bar is a component used in some diesel engines to control the flow of air into the engine cylinders for improved performance and fuel efficiency. It is typically located in the intake manifold and is used...

Product Description The Eccentric Shaft Sensor is a component used in some modern engines, particularly those with variable valve timing systems. It is typically located on or near the camshaft or valvetrain and works by measuring the position of the camshaft relative to the...

 Specifications Quantity: 4 Pcs Weight: 2 kg Year: 2010-2016 OE Number: 11257601181 Warranty: 12 months Engine Model:   N18 B16   N13 N18 B16 A N13 N18 B16 C Highlight  Superior Aluminium Tight Fit with Cylinder Durable in Use Warranty Provided Registered Trademark: Daysyore Compatibility 2016 BMW 120i Base...

Product Description The Fuel Pump Suction Control Valve (SCV) is a component of the fuel system in diesel engines. It is responsible for regulating the amount of fuel that is drawn from the fuel tank and sent to the high pressure fuel pump.The SCV is...

Perfectly Upgraded The front upper control arms with ball joints in original factory are made of a single sheet of stamped steel easy to be deformed during large load bumps in the off-road process. However, ours has been upgraded from the original part, not...

Safe Installation Regardless of the type of suspension, the front upper control arm plays a key role in maintaining proper wheel alignment, controlling wheel, and tire movement, and absorbing shock and vibration from the road. Our front upper control arms with ball joints simply...

Upgraded Design The upgraded version of the Tacoma upper control arms represents a significant improvement over the original parts. Designed to offer superior performance and durability, these control arms are specifically coordinated with the lift kit that typically includes various components such as extended...

Technology Process The front upper control arms with ball joints adopt technology integration for precision and durability. Among, TIG (Tungsten Inert Gas) welding is a high-precision technique, so that the resulting weld is strong, high quality, and looks nice. CNC (Computer Numerical Control) machining...

Rotary Ball Joint The tower-style cover sits on top of the ball joint for avoiding dirt, debris, etc. from entering, while the bottom shield sits beneath the ball joint and helps to prevent debris from getting inside. The hex nut makes it easier to...

Specification: Item Weight: 7.55KG/16.64lb Condition: 100% Brand New Material: Steel Color: Red Placement on Vehicle: Left,Front,Right,Upper Surface treatment: Powder coated Bushing Material：Rubber Item Size: 36x36x16/14.17x14.17x6.19inches Package Includes 2 x Front Upper Control Arms  Compatible 2007-2018 Silverado 1500 (only fit OE forged /casting steel arm)...