Free shipping to the continental US
How to Install
1. Disconnect the battery and allow the engine to cool.
2. Remove the EGR valve and cooler.
3. Install the anodized block-off plate.
4. Replace the coolant hose.
5. Cut or loosen bolts and clamps on the old exhaust system.
6. Install the front block-off plate and the rear block-off plate.
7. Connect the new throttle valve pipe, and other components.
8. Tighten all bolts and clamps securely.
9. Reprogram the engine control module(ECM).
10. Reconnect the battery.
11. Start the engine and check for any leaks.
|Material||Aluminum & Stainless Steel & Silicone|
|Compatible Model||Dodge Ram Pickup|
|Engine Model||6.7 Cummins|
|2013||Dodge Ram 6.7 Cummins|
|2014||Dodge Ram 6.7 Cummins|
|2015||Dodge Ram 6.7 Cummins|
|2016||Dodge Ram 6.7 Cummins|
|2017||Dodge Ram 6.7 Cummins|
|2018||Dodge Ram 6.7 Cummins|
If you have experience working on engines and are familiar with the components involved in the EGR system, you may be able to install the 6.7 l cummins egr delete kit yourself. However, it is recommended to have a professional mechanic perform the installation to ensure that it is done correctly and safely.
Installing the dodge 6.7 egr delete can help to improve engine performance, increase fuel efficiency, reduce maintenance, and prevent potential damage to the engine caused by the EGR system.
Yes, it is highly recommended to tune the engine after installing the dodge delete kit. The EGR system is an integral part of the engine's emissions control system, and removing it can alter the engine's operating parameters. Tuning the engine ensures that it continues to operate correctly and efficiently after the EGR system has been removed.
A proper engine tune can adjust various parameters such as fuel injection timing, air/fuel ratios, and boost levels to optimize performance and ensure the engine runs smoothly without any issues. Additionally, tuning can help prevent issues such as check engine lights and limp mode due to the removal of the EGR system.
It depends on the specific vehicle and the condition of its EGR system. In general, an EGR delete can help improve engine performance and responsiveness by increasing airflow and reducing the amount of exhaust gas that is recirculated back into the engine. This can lead to increases in horsepower and torque, and improved fuel efficiency.
However, it is important to note that the actual increase in horsepower will depend on a variety of factors, including the condition of the engine, the type of EGR delete kit used, and the tuning of the engine management system. In some cases, the increase in horsepower may be relatively small, while in other cases the increase in horsepower may be more significant.
It is important to remember that installing an EGR delete kit cummins can have other effects on the vehicle, including increased emissions and reduced reliability. In addition, tampering with emission control systems is illegal in many jurisdictions and can result in significant fines and penalties, such as California, New York, Colorado, and Maine. However, some people may choose to use an EGR delete kit for off-road or competition use only, where emissions standards may not apply. Therefore, it is important to carefully consider these factors and confirm your local laws before deciding to install an EGR delete kit cummins.